• 技术服务SERVICE
  • 整车系统设计
  • 局部系统设计
  • 危险货物罐体设计和国际认证检测
  • 二手专用农机海外代购
  • 下载中心
  • Export ProductsExport Products
  • Tractor
  • Backhoe Loader
  • Wheel Loader
  • Forklift
  • Components
  • 液压产品
  • 艾普拉斯 Aplus
  • 其他
  • 意大利CBM
  • 荷兰Zuidberg
  • 德国CLAAS
  • 德国LACOTEC
  • 备件
  • AxleTech
  • Carraro
  • Export Products
  • Tractor
  • Backhoe Loader
  • Wheel Loader
  • Forklift
  • Components
  • 您当前的位置:首页 >> 公司产品 >> 电器系统 >> 意大利COBO >> DC-DC转换器/油门踏板/保险盒
    油门踏板
    发布人: 日期:2013-06-14 来源: 点击量:4154
    EPD
    ELECTRONIC PEDAL DEVICE
     
    Product description
    COBO EPD (Electronic Pedal) has been designed to be installed in vehicles equipped with the electronic controlled diesel, gasoline or electric engines through ECU interface. It can be anyhow installed in vehicles with traditional electro-hydraulic actuators if coupled with the proper actuator.
    COBO EPD pedal has been manufactured using robust materials and advanced assembling procedure. It can be installed on cabin floor of any machine. Due to its die-cast aluminum frame, stainless steel mechanic and nylon superstructure, it guarantees maximum traveling comfort and operating safety during off-road heavy duty use. Reliability is guaranteed by severe environmental and electrical tests.
    COBO pedal is using angular contactless hall effect type sensor, it is "redundant" and programmable. This unique feature is necessary to comply the most severe safety international regulations and programmability allows to configure pedal output signals ready to be used with any available engine in the market. COBO EPD is full programmable and it allow 5 points linearisation of the characteristic.
    It is available with analogue or PWM or CAN BUS for a direct link with the latest engine control units available.

    Data sheet
     
     
    Analogue version
    Power supply:5V±10%
    Logic power consumption: typical 17mA。Hall effect linear position sensor
    Output type:Sink/Source
    Linearity:±3% or better
    Output current:typical 2,5mA
    Sink/source: (Vs>4,5V)
    Response time:1,8ms
    Load dump field decay:±45V
     
    Reverse polarity protection,Total full electronics resin finish,Independent circuit for IVS

    CAN-BUS version
    Power supply:8÷30 V
    Logic power consumption:25mA typical,Hall effect linear position sensor
    Output type:CAN-BUS 2.0B (11 or 29-bit), ISO 11898-2 compliance, max. 1 Mbit/s
    Linearity:±3% or better
    CAN message rate:= 10ms
    Load dump field decay:±45V
     
    Reverse polarity protection,Total full electronics resin finish,Independent circuit for IVS

    MECHANICAL AND RATING
    Operative temperature range:-30°c to 80°C
    Connector:Deutsch DT 04-6p (6 poles)
    Ingress Protection: IP69K (for all electric parts)
    Expected Mechanic Lifetime:106
    Material:Frame,Aluminum:Pedal,PA6

     

    上一页:保险盒下一页:无
    公司产品 | 典型应用 | 技术服务 | Export Products

    北京欣达立成工程技术有限公司@版权所有 010-84724571 备案号:京ICP备14008345号